Engineered to eliminate moisture hazards in battery, pharmaceutical, cleanroom, and military manufacturing. Every unit delivers certified efficiency and continuous performance.
DHU series rotary desiccant dehumidifiers deliver stable low-dew-point air where refrigeration alone cannot reach — from battery dry rooms to military storage.
Complete humidity-controlled rooms — enclosure, air handling, dehumidification, controls, and validation — delivered under a single engineered contract.
Captures N-Methyl-2-pyrrolidone from lithium battery electrode coater exhaust for high-purity reuse, slashing raw solvent costs and stack emissions.
Deep-cooling condensation combined with regenerative thermal oxidation (RTO) technologies to safely process hazardous industrial exhaust gases.
Cost-effective ambient moisture extraction tailored for industrial storage facilities, pre-cooling stages, and general production warehouses.
Dual-wheel cascade desiccant units engineered specifically for extreme humidity differential operations in tropical and maritime environments.
Sanitary stainless-steel construction with anti-microbial desiccant rotors designed for drug synthesis, capsule filling, and aseptic cleanrooms.
Comprehensive climate engineering: high-efficiency dehumidification combined with integrated chilled water, ductwork, and smart building management.
International procurement for industrial desiccant wheel dehumidifiers has shifted fundamentally from standard off-the-shelf catalog sourcing to precision engineering audits and lifecycle energy validation.
Global demand is predominantly spearheaded by lithium-ion battery manufacturing, next-gen solid-state R&D, and energy storage systems (ESS). Ultra-dry air with dew points between -40°C and -70°C is an indispensable prerequisite to prevent lithium electrolyte hydrolysis, which forms corrosive hydrofluoric acid (HF) and ruins cell cycle life.
Industrial desiccant dehumidification is traditionally energy-intensive due to thermal rotor reactivations. Tier-1 multinational procurement directors prioritize factories capable of delivering heat-pipe recovery, waste steam reactivation, and secondary purge recirculation loops that reduce aggregate HVAC electricity consumption by over 30%.
China is recognized as the global nerve center for advanced desiccant rotor manufacturing and dry room engineering. Hosting the world's most comprehensive supply chains and rigorous field testing grounds, certified Chinese factories offer proven technological maturity and fast delivery lead times compared to Western OEMs.
We calculate psychrometric loads tailored specifically to each manufacturing process's chemical sensitivity rather than forcing standard catalog dimensions.
Providing turnkey dry rooms and high-capacity desiccant rotor air handlers maintaining supply air down to -70°C dew point. Enforces absolute chemical integrity across cathode/anode preparation, winding, stacking, electrolyte filling, and sealing workshops.
Prevents agglomeration, caking, and bacterial proliferation during fluid-bed drying, tableting, effervescent compounding, and soft-gelatin encapsulation. Strict adherence to FDA cGMP, EU Annex 1, and global cleanroom standards.
Integrated climate control systems engineered under strict GJB national military quality standards. Safeguards precision avionics, missile propulsion stages, ammunition stocks, and naval electronics against moisture-induced corrosion.
Deep-cooling condensation coupled with Regenerative Thermal Oxidizers (RTO). Successfully recovers volatilized hydrocarbons and volatile organic compounds during fuel bulk loading, chemical cracking, and storage tank respiration.
Continuous, fluctuation-free dew point and temperature containment preventing wafer surface oxidation, resist peeling, and haze formation on micro-optical sensors and photolithography masks.
Founded in 2010, Hangzhou DryAir Treatment Co., Ltd. has grown to rank within China's top three desiccant dehumidifier manufacturers, controlling over 30% of the domestic market share and serving leading global gigafactories.
Our dedicated R&D and engineering department houses 6 PhDs and Master's graduates, 2 national registered HVAC engineers, 8 senior engineers, and 58 skilled technicians focused on thermodynamics.
Validated operational history delivering turnkey projects for Tesla, Northvolt, CATL, ATL, BYD, EVE Energy, SVOLT, and TTI, supporting massive parallel manufacturing schedules without lead-time compromises.
DryAir commands over 30% of China's high-specification desiccant dehumidification sector, built upon multi-year repeat supplier contracts from world-class lithium cell innovators.
Our modern manufacturing base in Hangzhou features fully integrated sheet metal, coil winding, rotor assembly, and clean assembly lines capable of delivering 200+ industrial systems per month.
Every unit undergoes psychrometric load verification in our in-house simulated environmental test center before shipment, maintaining zero field commissioning defects.
Offering remote IoT telemetry diagnostics, rapid spare parts deployment, factory-trained dispatch teams, and optional 2-year overseas extended maintenance agreements.
Over-specifying humidity targets results in excessive parasitic HVAC energy costs, while under-specifying causes chemical defects and product recall. Use this baseline matrix for RFQ tenders.
| Industrial Application / Process Zone | Required Humidity / Dew Point Spec | Recommended System Configuration | Procurement Link |
|---|---|---|---|
| Lithium-Ion Cell Assembly & Electrolyte Filling | -40°C to -60°C Dew Point | Turn-key Dry Room System + Low-Dew-Point Rotor AHU | View Dry Room Specs |
| Next-Generation & Lithium-Metal Solid State | Down to -70°C Dew Point | Ultra-Low DP Desiccant Dehumidifier (Cascade Rotors) | View Desiccant Specs |
| Cathode Electrode Slurry Coating & Drying Exhaust | ≥99% Solvent Recovery Efficiency | Closed-Loop Deep-Condensation NMP Recovery Unit | View NMP Specs |
| Hygroscopic Pharma Powders, Tableting & Capsules | 10% to 30% Relative Humidity (RH) | Sanitary Cleanroom Desiccant Dehumidifier Unit | View Pharma Units |
| Military Avionics & Ordnance Munitions Storage | ≤40% Relative Humidity (RH) | GJB Standard Corrosion-Inhibiting Rotor Dehumidifier | View Defense Specs |
| Bulk Raw Material Warehouses & System Pre-Cooling | 45% to 60% Relative Humidity (RH) | High-Efficiency Industrial Refrigerative Dehumidifier | View Refrigerative |
| Petrochemical Fuel Loading & Chemical Solvent Exhaust | Regional Emission Limit Compliance | Deep-Cooling Condensation + RTO Abatement System | View VOC Systems |
A disciplined 5-stage engineering delivery workflow keeping procurement, mechanical contractors, and plant production managers aligned from initial enquiry through full-speed manufacturing.
Comprehensive moisture load modeling, infiltration audit, personnel latent heat calculations, and target dew point design parameters.
3D airflow layout, thermal regeneration optimization, cascade rotor sizing, and control architecture schematics.
In-house CNC fabrication, air-tight insulated casing, rotor assembly, and performance verification in our simulated test chambers.
Mechanical installation, air-duct airtightness sealing, system wiring, dynamic commissioning, and multi-point dew point validation.
On-site preventive audits, rapid component replacement, remote IoT operational supervision, and comprehensive staff training.
As commercial manufacturing moves toward carbon neutrality and extreme chemistry requirements, DryAir is advancing next-generation desiccant technologies.
Engineering cutting-edge MOF and functionalized zeolite composite rotors that drastically shift desiccant adsorption isotherms, enabling high water uptake at lower reactivation temperatures (<70°C) to utilize industrial low-grade waste hot water.
Next-generation sulfide-based solid-state lithium electrolytes exhibit instantaneous degradation upon contact with even trace moisture. We are standardizing multi-stage cascade rotor AHUs delivering consistent -80°C dew point airflows at industrial volumes.
Integrating neural-network predictive control into our embedded PLC units. Systems continuously evaluate outdoor ambient enthalpy fluctuations, worker occupancy levels, and real-time production status to optimize rotor speed and heater output dynamically.
Eliminating deployment risks for overseas buyers through rigorous electrical certification, pressure vessel compliance, and comprehensive on-site engineering assistance.
Designed and labeled in full conformity with European Machinery Directive (2006/42/EC), Low Voltage Directive (LVD), and Electromagnetic Compatibility (EMC), guaranteeing seamless customs clearance and commissioning across the EU.
Equipped with UL 508A-certified control panels, CSA-approved electrical wiring, and AHRI-compliant heat exchanger coils tailored to 480V/60Hz and 600V grid specifications across the US and Canada.
Our pressure piping, condensation heat exchangers, and refrigerant circuits meet ASME Section VIII standards as well as EAC TR CU certifications for the Eurasian Economic Union.
DryAir deploys bilingual commissioning supervisors to international construction jobsites to manage ductwork leakage audits, sensor calibration, air balancing, and local contractor handover.
International clients can secure an optional 2-year extended warranty and maintenance agreement featuring dedicated spare parts lockers, scheduled on-site maintenance, and prioritized remote IoT telemetry support.
Field-tested operational best practices authored by DryAir's HVAC and solvent recovery engineering staff.
Oil gas condensation recovery systems help fuel storage and handling facilities capture oil vapors during tank filling, loading and unloading before they are released into the atmosphere.
Read Full Article
NMP is widely used in electrode slurry preparation and coating. Learn how to keep recovery efficiency stable, reduce solvent loss and control emissions in round-the-clock production.
Read Full Article
From powder processing to tablet compression, capsule filling and packaging, excess moisture affects product quality and efficiency. Here is how to identify and prevent the risks.
Read Full ArticleStraightforward technical answers regarding performance validation, warranties, certifications, and global site delivery.
Explore our full manufactured catalog. Submit your project requirements to receive a customized psychrometric heat-mass balance design within 24 hours.
Reliable moisture extraction engineered for continuous 24/7 round-the-clock drying in extreme process cleanrooms.
Request Specs
Airtight thermal wall panels, fireproof ceiling systems, laminar air distribution, and automated environmental sensors.
Request Specs
Closed-loop solvent condensing units recovering valuable cathode chemicals while safeguarding atmospheric purity.
Request Specs
Regenerative thermal incinerators destroying hazardous pollutants with integrated ceramic bed thermal regeneration.
Request SpecsCondensation-based ambient dehumidifiers engineered for storage facilities and preliminary high-volume air extraction.
Request Specs
Heavy-duty corrosion control systems protecting sensitive munitions, radar electronics, and ordnance depots.
Request Specs
Deep chilling condensation stages that capture volatilized light hydrocarbons during tanker loading and fuel venting.
Request Specs
Integrates HEPA filtration, precision cooling, re-heat, and desiccant wheel stages into an isolated sanitary skid.
Request SpecsPlanning a gigafactory dry room, pharmaceutical renovation, or solvent abatement upgrade? Contact Hangzhou DryAir directly for psychrometric calculations, rotor equipment sizing, and customized budgetary quotations.
