DP -70°C
Industrial Desiccant Dehumidifier
Rotary sorption silica gel systems engineered for extreme moisture extraction where conventional chilling systems fail.
View Specifications
Export Product Catalog
Precision Dehumidification & Environmental Systems
Delivering high-capacity sorption rotors, ultralow dew point air handlers, and turnkey clean-dry rooms designed to prevent catastrophic moisture defects.
DP -70°C
Turnkey EPC
Turn-key Dry Room System
End-to-end engineered cleanrooms with strict vapor barrier envelopes and multi-stage dehumidification for battery assembly.
Explore Dry Rooms
Efficiency ≥99%
NMP Solvent Recovery System
High-efficiency solvent condensation that captures volatile NMP emissions from drying ovens for closed-loop recycling.
Learn More
RTO Condensation
VOC Abatement System
Regenerative thermal oxidation and cryogenic condensation designed for industrial process air compliance.
Learn More
Pre-Cooling Unit
Refrigerative Dehumidifier
Energy-optimized primary condensing units for commercial moisture extraction and low dew point pre-treatment stages.
Learn More
Silica Gel Rotor
Custom Desiccant Air Handler
Modular air management systems tailored with synthesized composite silica wheels for pharmaceutical powder drying.
Explore System
Gigafactory Scale
Modular Battery Dry Room
Rapid-assembly environmental enclosures featuring low-leakage panel joints and continuous psychrometric monitoring.
View Solutions
Zero Venting
Exhaust Gas & Solvent Absorber
Integrated environmental mitigation systems combining cryogenic recovery with rotary adsorption for zero-vent targets.
Discover More
Industry White Paper
Global Industrial Status & The Physics of Sorption Dehumidification
An authoritative analysis of psychrometric control, global supply chains, and zero-defect thermal processes across advanced gigafactories and biopharmaceutical cleanrooms.
-70°C
Minimum Controllable Dew Point
≥99%
NMP Industrial Solvent Recovery
30%+
Market Share in Domestic Tier-1 Sector
200+
Custom Industrial Units Produced Monthly
74
Registered Engineers & HVAC PhD Specialists
Macro Market Paradigm Shift
Global decarbonization initiatives, electric vehicle mass adoption, and biopharmaceutical compliance are straining traditional HVAC limits. Modern cleanrooms require relative humidity held below 1% (equivalent to dew points lower than -40°C to -70°C), demanding low-temperature active desiccant wheels where standard mechanical refrigeration completely frosts over.
Next-Gen Battery Chemistries
The Chemistry of Sorption Media
Silica gel rotor technology utilizes a synthesized honeycomb substrate coated with microscopically porous active silica gel. Water vapor molecules in the process airstream are captured via capillary condensation into nanoscale pores without physical degradation, allowing indefinite thermal regeneration cycles without desiccant loss.
Nanoporous Silica Substrate
Mitigating Destructive HF Gas
In lithium-ion manufacturing, ambient moisture interacts with lithium hexafluorophosphate (LiPF6) in the electrolyte to create hydrofluoric acid (HF). Even microscopic humidity causes safety hazards, capacity fade, and cell fires. Industrial wholesale silica gel dehumidifiers eliminate this vulnerability during jelly-roll winding and sealing.
Critical Electrolyte Shield
Direct Factory Prowess
Chinese Factory Efficiency: The Engine of Global Delivery
Hangzhou DryAir combines advanced vertical integration, rigorous military-grade production standards, and scalable lean manufacturing to support tier-one international clients.
Massive 200+ Unit Monthly Throughput
Located in the Qingshan Industrial Park, Lin'an, Hangzhou, our automated manufacturing facilities feature high-precision CNC laser cutting, automated polyurethane foam-injection panel presses, and dynamic balancing chambers for heavy-duty desiccant wheels.
Parallel Fast-Track Execution
Rigorous In-House Testing Lab
Every industrial unit undergoes certified performance validation in our simulated psychrometric test room before export packing. Supply air dew points, motor amperages, regeneration thermal curves, and casing air leakage rates are logged to guarantee compliance.
Factory-Audited Quality
Up to 40% OPEX Reduction
Our thermal engineering optimizes regeneration energy consumption through heat pipes, exhaust air enthalpy wheels, and waste heat recovery loops that draw from industrial steam, hot water, or heat pumps—slashing the highest operating cost in dry room operation.
Optimized Total Lifecycle Cost
Full Global Compliance
Export models are custom-wired to regional electrical topologies (e.g., 480V 60Hz 3-phase for North America; 400V 50Hz for Europe) and certified under CE, UL 1995/CSA, ASME pressure vessel protocols, and EAC technical regulations.
Plug-and-Play Integration
Application Engineering
Engineered Solutions for Critical Application Sectors
Moisture tolerances vary across materials and processes. We customize every system around specific dew point requirements to optimize product yield.
| Industrial Application | Target Moisture / Dew Point | Core System Architecture | Primary Industrial Risk Mitigated |
|---|---|---|---|
| Lithium-Ion Battery Assembly | -40°C to -60°C DP | Turn-key Low Dew Point Dry Room + Double Rotor DHU | Electrolyte hydrolysis, HF gas formation, cell swelling |
| Next-Gen Lithium Metal & Solid State | Down to -70°C DP | Ultra-Low Dew Point Sorption Rotor System with Purge | Severe pure lithium foil oxidation and passivation loss |
| Cathode Slurry & NMP Coater Lines | ≥99% Solvent Capture | ZJRH Closed-Loop NMP Solvent Recovery Unit | Toxic emissions, excessive solvent purchasing costs |
| Pharma Powders, Gelatin & Packaging | 10% – 30% RH | GMP-Compliant Silica Gel Rotor Dehumidifier | Powder clumping, capsule softening, shelf-life failure |
| Aerospace, Avionics & Defense Logistics | ≤40% RH | GJB-Certified Industrial Desiccant Unit | Electronic contact corrosion, propellant degradation |
| Bulk Chemical, Petrochemical & Loading | Stringent VOC Compliance | Deep-Cooling Condensation + Regenerative Thermal Oxidizer | Atmospheric VOC pollution, hazardous vapor buildup |
Future Insights
Global Procurement Demands & Industry Technology Trends
How international project developers evaluate suppliers for multi-gigawatt facilities and clean industrial operations.
Demand for Turnkey EPC Accountability
Global procurement teams are moving away from split vendor setups—where enclosure builders, dehumidifier suppliers, and piping teams shift blame for humidity spikes. DryAir provides turnkey accountability from single-source design to on-site commissioning.
Single-Source Responsibility
Smart IoT Psychrometric Modulation
Modern plants integrate intelligent psychrometric controls with PLC and SCADA protocols. Sensors monitor outdoor wet bulb variations in real time, modulating rotor speeds and regeneration heat inputs dynamically to reduce auxiliary energy use by up to 28%.
Predictive SCADA Control
Decarbonization & Circular Chemistry
With stringent global ESG reporting, closed-loop systems are replacing open exhausts. Capturing 99%+ of NMP solvent vapors returns purified raw materials to production lines, lowering operational costs and cutting factory emissions.
Closed-Loop Sustainable Chem
Execution Roadmap
Turnkey Project Delivery Framework
A transparent engineering workflow that aligns engineering, procurement, and project timelines from initial consultation to production validation.
01. Consulting
Detailed psychrometric analysis, sensible and latent moisture load auditing, and dew point targets.
02. Engineering
Airflow modeling, CAD/BIM duct layouts, dynamic heat recovery, and custom electrical design.
03. Manufacturing
CNC metal processing, polyurethane panel forming, and complete in-house performance audits.
04. Commissioning
On-site installation, envelope leakage verification, system balancing, and dew point sign-off.
05. Lifecycle Support
Overseas maintenance contracts, rapid spare parts shipping, and remote SCADA monitoring support.
Technical Publications
Engineering Insights & Case Studies
Deep technical analyses from our project sites to support informed specification and tender development.
How Does an Oil Gas Condensation Recovery System Work?
An in-depth review of deep refrigeration stages and multi-stage condensation techniques designed to capture volatile hydrocarbons during fuel transfer and storage operations.
VOC Abatement
Read Technical Brief
Maintaining Stable NMP Recovery in Continuous Operation
Key operating considerations for electrode coating lines running 24/7. Managing condensation temps, solvent concentrations, and heat integration to keep recovery rates above 99%.
Process Reliability
Read Technical Brief
Excess Humidity Risks in Pharmaceutical Manufacturing
Analyzing powder caking, inconsistent dosing, and packaging integrity failures caused by humidity spikes, with design strategies for GMP cleanroom operations.
Pharma Compliance
Read Technical Brief
Direct Answers
Frequently Asked Questions (FAQ) for International Buyers
Performance guarantees, export compliance, and project execution support for global procurement and plant engineering teams.
What is the lowest dew point a DryAir desiccant dehumidifier can stably achieve?
Hangzhou DryAir rotary desiccant dehumidifiers deliver stable supply air dew points down to a minimum of -70°C dew point (under standard cleanroom return air parameters). This meets the strictest tolerances for lithium metal cell assembly, solid-state electrolyte development, and sensitive chemical packaging.
Do you deliver complete turnkey dry rooms outside of China?
Yes. We execute full turnkey projects worldwide—including pre-sales psychrometric calculation, room envelope engineering, specialized air lock design, DHU manufacturing, site installation, and system validation. Our overseas delivery record includes projects for manufacturers like Tesla, Northvolt, and TTI.
Which international certifications and standards do your dehumidifiers meet?
Depending on destination requirements, systems can be built to CE, UL 1995, CSA C22.2, ASME (for pressure vessels), and EAC standards. Our plant operates under ISO 9001 quality management and the GJB military-grade manufacturing system.
What recovery rate can a DryAir NMP recovery system achieve on coating lines?
Our ZJRH series systems achieve an NMP solvent recovery efficiency of ≥99% from electrode coater exhaust streams. This reduces raw material procurement costs and keeps industrial emissions well within regional regulatory limits.
What after-sales and warranty coverage do you offer for international facilities?
We provide remote diagnostics via integrated PLC/cloud telemetry, fast global spare parts shipping, and on-site engineering dispatch for final commissioning. Buyers can also opt for an extended two-year global service agreement that covers planned preventive maintenance visits.
How do your systems optimize regeneration energy consumption?
Regeneration air heating accounts for the largest share of desiccant system OPEX. We design our units with multi-stage heat recovery systems—including sensible heat wheels, heat pipe exchangers, and hot water coils powered by industrial waste heat—cutting primary heating power draw by up to 25% to 40%.
System Shortlist
Select Industrial Equipment & Core System Solutions
Request engineering documentation, airflow sizing guides, and technical specifications for your facility tender.
Heavy Duty
DHU Rotary Desiccant Dehumidifier
Engineered for continuous moisture extraction with synthesized silica gel wheels and modular air filtration chambers.
View Specifications
Clean-Dry Rooms
Turnkey Cleanroom & Dehumidification
Integrated architectural panel structures, low dew point air distribution, and automated airlocks for cleanroom operations.
Explore Dry Rooms
Solvent Reuse
ZJRH Series NMP Recovery System
Dual-stage exhaust gas condensation unit designed for high-throughput battery electrode coating machines.
Learn More
Thermal Oxidation
JEN Series VOC Abatement Unit
Combines cryogenic solvent condensation with downstream RTO systems to meet strict environmental emission standards.
Learn More
Pre-Conditioning
High-Efficiency Mechanical Dehumidifier
Primary condensing dehumidifier engineered for warehouse humidity control and bulk fresh-air moisture removal.
Learn More
Custom Engineering
Sanitary Pharma Desiccant AHU
Double-skin casing with hygienic seals designed to eliminate microbial growth risks in GMP processing suites.
Explore System
Ultra-Low Dewpoint
Modular Pouch / Prismatic Cell Dry Room
High-integrity containment units engineered to support high-yield cell production lines down to -60°C DP.
View Solutions
Emission Control
Solvent Recovery & Abatement Station
Integrated skid-mounted system for industrial process air filtration, solvent recovery, and environmental emissions compliance.
Discover MoreConsult with Our Senior HVAC Systems Engineers
Get customized psychrometric airflow calculations, system model recommendations, and complete CAD layout support within one business day.