Precision thermodynamic rotor architecture, ultra-low dew point engineering, and volatile abatement systems engineered for peak performance in high-humidity maritime climates.
DP -70°C Control
DHU series rotary desiccant dehumidifiers deliver stable low-dew-point air where refrigeration alone cannot reach — from battery dry rooms to military storage in Istanbul industrial zones.
View Specifications
EPC Turnkey Solution
Complete humidity-controlled clean enclosures — hermetic envelope, air handling, cascade dehumidification, dynamic PLC control, and on-site Turkish validation under a single turnkey contract.
Explore Dry Rooms
Recovery ≥99%
Captures N-Methyl-2-pyrrolidone from lithium battery electrode coater exhaust for immediate clean purification and reuse, drastically slashing chemical raw material spend and Turkish exhaust emissions.
Learn More
Cooling + RTO
Deep-cooling condensation and regenerative thermal oxidation (RTO) engineered to treat complex industrial volatile organic compounds and recover valuable petrochemical vapors efficiently.
Learn MoreA deep dive into why conventional mechanical chillers fail during Istanbul's high-dew-point summers and how industrial desiccant rotors ensure uninterrupted manufacturing compliance.
Istanbul sits at the biological and geographical nexus between the Black Sea and the Sea of Marmara, experiencing extreme ambient humidity swings throughout the year. During seasonal peaks from June through September, outdoor relative humidity regularly surpasses 85% at 32°C dry bulb temperatures. This generates moisture loads exceeding 19.5 grams of water vapor per kilogram of dry air (g/kg).
For modern manufacturing clusters in Tuzla, Dilovası, İkitelli, and Çerkezköy, this ambient latent load presents an aggressive operational risk. Standard condensing dehumidifiers or HVAC coils hit a thermodynamic frost limit at a dew point of approximately 4°C to 6°C. Attempting to freeze out moisture below this threshold causes evaporator icing, ballooning energy consumption and resulting in severe relative humidity spikes on factory floors.
Turkey’s assertive transition toward a regional battery and EV manufacturing hub—spearheaded by projects along the Kocaeli-Istanbul corridor—has created unprecedented demand for ultra-dry atmospheres. Lithium-ion cell assembly and electrolyte injection demand strict supply air dew points ranging from -40°C down to -70°C to prevent hydrogen fluoride (HF) genesis, fire hazards, and premature cell degradation.
Simultaneously, Istanbul's massive pharmaceutical sector (producing solid dosage formulations, effervescent antibiotics, and lyophilized vials) requires strict compliance with WHO and Turkish Ministry of Health GMP guidelines, where RH must remain immutably fixed between 15% and 25% without thermodynamic overshoot.
How DryAir achieves stable -70°C dew point performance while curtailing industrial operational energy expenditure (OPEX) by up to 38%.
By configuring synthesized active silica gel or crystalline 3A/4A zeolite molecular sieve matrices in a dual-stage series, the primary rotor strips bulk latent moisture while the polishing second rotor drives absolute humidity down to parts-per-billion levels (dew point < -70°C).
Regeneration thermal loads account for up to 70% of a desiccant system's energy bill. DryAir incorporates closed-loop purge sector recapture, heat pipes, and exhaust thermal wheel recovery, reclaiming up to 35% of waste reactivation energy back into the regeneration plenum.
Embedded Siemens PLC systems interface with high-precision optical chilled-mirror dew point hygrometers. Predictive PID algorithms automatically throttle reactivation fan speeds and heaters based on real-time external humidity fluctuations across the Marmara coastal winds.
Each industrial manufacturing sector carries discrete moisture sensitivity risks. We configure thermodynamic air handlers around target dew point thresholds and product chemistry.
-40 to -70°C DP
Moisture reacts with electrolyte to form toxic, corrosive HF acid, deteriorating energy storage density and safety. Our ultra-dry room installations safeguard automated electrode stacking, winding, electrolyte filling, and sealing operations.
Dry Room Engineering
GMP Cleanroom Area
Hygroscopic powders, effervescent tablets, soft gelatin encapsulation, and diagnostic reagents demand tightly stabilized low RH to eliminate caking, micro-biological blooms, and pill dissolution failure during high-speed blister packing.
Pharma Dehumidification
GJB / Military Spec
Integrated environmental systems built under military defense standards to preserve naval radar equipment, ammunition silos, avionics hangars, and mothballed fleet assets along Istanbul’s Golden Horn and Tuzla Shipyards.
Defense Air TreatmentDirect factory-to-port logistics delivering heavy-duty dehumidification skids to Istanbul with unrivaled engineering velocity and stringent quality assurance.
Headquartered in the Qingshan Lake Science & Technology City of Hangzhou, Hangzhou DryAir Treatment Co., Ltd. (founded in 2010) stands among the world's most capable industrial dehumidification manufacturers. Our state-of-the-art 4.0 production facility spans over 40,000 square meters, equipped with robotic laser metal cutting, automated CNC bending, continuous polyurethane foaming insulation lines, and dynamic balancing test benches for oversized desiccant rotors.
With an average output capacity exceeding 200 large-scale industrial dehumidification units per month, our supply chain effortlessly handles multi-gigawatt battery production phases. From our factory floor, containerized modular units are shipped directly via Shanghai/Ningbo maritime channels directly to Istanbul’s Port of Ambarlı and Haydarpaşa Port, or fast-tracked via Eurasia rail freight within 16-18 days.
This vertical manufacturing model eliminates component middlemen, offering Turkish industrial buyers premium European-standard craftsmanship at substantial capital cost savings.
Comprehensive certification portfolios combined with bilingual engineering field technicians ensuring swift commissioning and lifelong uptime across Turkey.
All units dispatched to Istanbul comply rigorously with the European Machinery Directive (2006/42/EC), Low Voltage Directive (LVD), and Electromagnetic Compatibility (EMC). UL, CSA, ASME, and EAC certifications are standardly available upon request.
DryAir provides factory-certified field service specialists for on-site duct balancing, rotor alignment, sensor calibration, and SAT (Site Acceptance Testing) across Organized Industrial Zones (OSB) in Istanbul and surrounding provinces.
Take advantage of our optional 2-Year Full Protection overseas service agreement. Systems feature remote industrial 4G/5G diagnostic gateways enabling DryAir thermal specialists to debug operations and forecast rotor saturation remotely.
Specifying correct dew point targets prevents multimillion-dollar yield failures while preventing energy over-expenditure. Use this reference matrix when preparing plant tenders.
| Target Industrial Application | Design Moisture / Dew Point Target | System Architecture Recommendation | Action |
|---|---|---|---|
| Lithium-Ion Cell Assembly & Electrolyte Filling | -40°C to -60°C Dew Point | Turn-key Hermetic Battery Dry Room + Zeolite Rotor Cascade | Review System |
| Next-Gen Solid State & Lithium-Metal Cells | Down to -70°C Dew Point | Ultra-Low Dew Point Desiccant Dehumidifier (DHU Series) | Review System |
| Electrode Coating & Drying Exhaust | ≥99% Solvent Condensation Purity | ZJRH Series Closed-Loop NMP Recovery Skids | Review System |
| Hygroscopic Pharma Powders, Tableting & Capsules | 10% – 30% RH (DP < 2°C) | Modular GMP Cleanroom Desiccant Dehumidifier Units | Review System |
| Naval Defense, Avionics & Ordnance Depots | ≤40% RH Non-Condensing | Corrosion-Resistant Industrial Desiccant Dehumidifier | Review System |
| Warehousing, Pre-Cooling & Food Processing | 45% – 60% RH Constant | High-Efficiency Commercial Refrigerative Dehumidifier | Review System |
| Petrochemical Storage Tanks & Solvent Exhaust | Strict VOC Turkish Emission Cap | JEN Deep-Cooling Condensation + RTO Thermal Systems | Review System |
Transparent 5-stage project engineering framework connecting consulting, thermodynamics, precision manufacturing, and validation.
Comprehensive evaluation of indoor infiltration, personnel latent moisture, wall permeation, and ambient Marmara meteorological extremes to calculate precise required CFM and regeneration wattage.
Full 3D CFD airflow simulation, ductwork pressure drop balancing, cooling coil staging, and heat recovery integration modeled specifically for the plant’s mechanical room layout.
In-house production under ISO 9001 and military-grade GJB quality regimes. Stringent factory acceptance testing (FAT) inside our environmental test chambers before export packing.
On-site erection of double-wall insulated enclosures, sealing air locks, connecting chilled water loops, and performing full dew point validation down to -70°C with certified optical mirrors.
24/7 technical hotline, local emergency technician dispatch, preventive maintenance cycles, rotor washing services, and comprehensive spare parts warehousing in Turkey.
Send your plant blueprints to our Senior HVAC engineers today.
Send Inquiry NowPeer-reviewed technical analyses written by DryAir Senior HVAC Engineers to help plant managers optimize uptime and safety.
VOC Technical Whitepaper
Comprehensive analysis on vapor recovery during fuel terminal transfer, combining multi-stage sub-zero condensation refrigeration with secondary activated carbon polishing stages.
Read Whitepaper
Lithium Process Article
Examines thermal wheel condensation dynamics, chilled cooling coil foul prevention, and VOC concentration management on high-speed dual-sided lithium battery coating lines.
Read Whitepaper
GMP Pharma Study
Detailed psychrometric study on hygroscopic caking, mechanical die sticking during high-speed compression, and how solid desiccant adsorption stabilizes sterile packaging environments.
Read WhitepaperClear engineering and logistical answers addressing dew points, energy consumption, customs clearance, and Turkish site support.
Explore our complete catalog of industrial dehumidifiers, recovery systems, and cleanroom air treatment solutions engineered for the Turkish market.
DHU Industrial
Heavy-duty rotary silica-gel and zeolite desiccant systems for deep industrial moisture removal down to sub-zero dew points.
View Product
Gigafactory Spec
Hermetically sealed enclosures and low-dew-point HVAC air handling designed for ultra-dry battery production lines.
View Product
Solvent ≥99%
Advanced closed-circuit solvent recovery system for battery electrode coater exhaust streams, cutting operational costs.
View Product
Deep-Cooling + RTO
Deep-cooling condensation paired with regenerative thermal oxidizers to neutralize volatile organic industrial exhaust gases.
View ProductCost-effective mechanical moisture removal for warehouses, packaging workshops, and primary pre-cooling stages ahead of desiccant rotors.
View Product
Vapor Condensation
Engineered condensation skids built to capture volatile oil gas during petroleum transport, barge loading, and refinery storage.
View Product
High Recovery Efficiency
High-capacity automated solvent recapture module engineered specifically for high-yield battery giga-scale coater integration.
View Product
Cleanroom GMP Spec
Aseptic air handling units with integrated desiccant rotors designed for drug packaging, sterile compounding, and sterile powder storage.
View Product